Animation

The animation was very fun to do. And I felt that it required a lot of directing as opposed to designing.

The camera angles and movement of the models took a lot of thought as to where and when, and also why. for instance having the camera low, made my models look a lot bigger as they came to the camera, making them look fast, big, and powerful.

At the start I decided to make a simple starting line and lights, to show the audience what the animation was about, a race....

The idea of the lights changing similar to formula one, was to allow the audience to understand it was a race, and therefore get them to relate the two. The middle ships engines move forward slightly before the 'ship' itself, to give the audience the anticipation that it is going to move forward, But it is hard to notice in the final animation, and I believe I animated it slightly to fast so people cant really see it, it would have been better to make it slightly slower so people could see it. 

throughout the animation you can see the ships travelling at pace, with a high angled shot of the camera following the ships. this was to show the movement side of things, relying on the shadows going over the uneven terrain to show the speed, as opposed to making objects for the ships to pass, this was a good shot and the path constraints on the models and camera worked really well. 

I am happy with the fire effect when the ship crashes, but felt there was not enough reason for the ship to crash, just before the 'lazer' passing between the two engines is animated to flicker, like it is loosing power, but this isn't as visible within the shot, even after slowing the shot down.

The issue with the fire effect was placement, having used perspective view when placing you can see I did not place it precisely on the floor which would have been better, from the high angle shot it looks fine, but from the slow motion replay you can just make out it is above the ground. This would not have been acceptable, and if I had planned my animation better would not have happened. 

The Last shot of the ship slowing down uses the idea that the fins pop out from the ship first creating air resistance which slows down the ship and then allows the back half to lower. this was done to show more of the ship and what it was capable of, I would have like to have used the reaction manager but felt I was not confident enough after trying the exercise to use it within the animation. The fins are very useful and all come out to 45% from what they were. It would have been good to animate these within the turns to show how the ship reacts to a corner, but again didn't feel confident with the key frames and animation at the time to do that. In the future better planning would have allowed me to do this at the time, using a reaction manager for speed and rotation angle would have been good.

the last image shows where the bones went wrong, but unfortunately due to render times I had to leave it how it was, and also in other shots it is working correctly, so didn't understand how to change it. 

The animation was edited in windows movie maker,  the clips were compressed originally and I had to resize them too 800 X 600 in windows movie maker, I then had to dowload a free converter to change the file into an AVI file, I chose not to compress it further as it did give me the option as I didn't believe it needed recompressing.

Strengths Weaknesses Opportunities Threats

Overall my Models and Animation have been a great learning experience, I had no previous experience in 3DS Max but had heard and seen a lot of work from it.
I have Both enjoyed and hated the program at times but understand it is a very in depth modelling and animation program and wish to use it in the future, There is a lot I still don't know about it and believe there is a lot more it is capable of.

Strengths - 

• modelling advanced shapes and models, using flat diagrams and pictures.
• Creating Models using Components not one large model, this is mainly through understanding the model itself, and the components before the modelling even begins.
• Texturing components and having a good understanding of what to model, and what to leave to the texture. 
• Importing and exporting textures was simple, and had some very good outcomes.  e.g. the sky texture doesn't have a line down the middle at the beginning and end of the texture.
• Animating the models, I feel the animation side was great, and I got to grips with a lot of camera angles and techniques. I am probably most happy with the path constraints, and also the idea that one of the ships engines are attached by lines which actually bend and move using bones. It also allowed me to move parts of the ship slightly before others to give that sense its going to move. 
• Details on the ships have been both been one of my strengths and one of my weaknesses, the picture below shows some great detail on one of the models.  

• Polygon count, I feel the polygon count was acceptable for the project, as I had to have a large landscape as I wanted the ships to move with speed the terrain itself used a fair few, as I wanted an uneven realistic surface. As the landscape was quite big, it also made the sky dome quite large, which added to the count, but overall I don't feel it was too many, and I also would have cut it down further using textures for more aspects of the models then I currently have, but that does all come down to how close the camera gets to each model, and if it was to be used for other purposes... 
• Animating moving parts the model was easy, using the graph editor to make the engines continuously spin was simple and very effective. 

Weaknesses -

• Texturing my models proved harder then I expected, mainly due to the lack of skills in 'GIMP' or Photoshop. I am happy with the end results, but feel I could have spent more time on this side of my models to create a more realistic, and better models, they look to 'clean' for models which should spend there 'lives' racing around a desert.
•  Bones were a problem to begin with, spending a large amount of time getting them to work, in the end it being a simple case of re modelling the object they were attached too as it was a line and not a cylinder. 
• Finishing touches, I believe the models all though good, are not excellent, I would have wanted to add a lot more detail and possibly interior to each model, to ensure they looked correct from every single angle, there are times where you may see inside one of the engines and see something you don't wish too. The picture below shows three errors, all can be easily corrected, but the issue I had was noticing these in the first place, having rendered the scene it was only then I realized the issue, and at that stage felt it was unproductive to go back and change it and wait for the rendering again. it is also not so noticeable in the final animation. 

• Lighting I found to be an issue mainly due to editing models after I had excluded them from a light, therefore changing there grouping etc... making them included again. This created a very light looking render at one point with no realistic shadow. 
• within the animation there are stages where I feel it could have been improved, at times I lost track of seconds per frame, and this has resulted in the ships travelling at different speeds at times, It would have been better to measure a distance per second(or frame) to ensure they traveled at relatively the same speed throughout. Also during animating there are times where the ships may pass through the desert floor, this is because it is an uneven terrain, and as it does the animating for you, at times it is easy to miss the models doing this. 

Opportunities - 

• 3DS Max is a very good program to use for modelling, and animation, I feel I have not fully discovered its capabilities and want too look into the program further, but it is obvious it can be used to create very realistic still images or models, and animations. 
• Creating textures for the models could really make or break a model, Too have an artists help would be extremely beneficial to the models, someone who knew how to create anything within Photoshop would allow you to create very beautiful looking models. I wanted to make each ship look very sand dusted, but this proved too hard for me, but I believe a visual artist would be able to achieve this well, it would then be up to 3DS max to create the sand blowing across the desert, possibly with a particle system. 
• I would have liked to have used the reaction manager, so that when I turned the ships, there fins etc would have moved to create the idea they are helping the ship turn, but I spent a long time trying to make the bones system work, which meant I ran out of time to try it, Looking back this would have been a clear opportunity to improve my animation, using the reaction manager on each ship to make them move more realistic and not be so rigid. It could also be possible to slow down the engines as they slowed down etc... 
• The environment itself could have been better, I ideally wanted to create an arena they race through similar to the movie, but felt It was a bit too much work, as I wanted the animation to mainly focus on the three models designed. 

Threats -

• 3DS Max often crashed, losing work was an issue whilst modelling and animating.
• Importing and Exporting models into other files created an issue with textures, as They had the same name, renaming these textures from the start would have been the best method.
• Bones are good to use, but can bend the wrong way, in the final shot in my scene I can see one of the ropes attaching the engine to the ship bend up not down, I found it very hard to try and change and in the end gave up, the issue was that it was working the other way in previous shots and couldn't work out what had changed... 
• I feel my original storyboards were far too ambitious for my final product, Not realizing how hard it was going to be to animate and create a good finished product. In future I will continue to aim high in my work, but ensure it is achievable with hard work, As the storyboards were so ambitious I couldn't use them how I wanted too, using them more for camera angles etc... rather then following it exactly from scene to scene. 
• The Models themselves were harder to make then some, having chosen to do a pod race, I found there to be less material available online to work from to create realistic looking ships as to those in the movie, where as if I had picked some of the better known space ships from star wars, there was a large number of plans and drawings available. 

Creating an explosion

There was a few ways of creating an explosion in my scene, searching online there were two main methods to creating an 'explosion' one was using a PArray, found in the creation tab, under particle systems. The problem with using this on my models, was that because the model was moving, the particles also moved with the animation, and I could not find an effect way to stop this, I could start the Particle system at the correct frame, and even though the model was still there was still issues with the particles continuing to travel.

The second option was to use a 'Bomb'. This is found within the creation > Space Warps > Geometric/Deformable > Bomb.

Using this technique was ok, placing a bomb within the model and attaching it too the model I wish to explode. But I could not get this effect to work with the animation, So have left it as something to look into further. 

I found the most effective way of creating an explosion was too use a Sphere Gizmo, and adding a 'Fire Effect' to this. This created a very good explosion which could be timed and placed where I wanted within my animation. The model simply disappears as the explosion happens giving the appearance of the model exploding. 

lighting continued and Path constraints

Lighting my animation has been slightly tricky, with the outcome changing a number of times, the Omni lighting used was added to the scene, and everything except certain groups were excluded, the issue was if I then un-grouped or created something new, this would not be included in the exclusion. 

It is clear lighting and camera's should be set up after EVERYTHING in the scene has been created and modified, this will save time and ensure nothing is lit up by lights that should not be. 
It had a large effect on my first animation with materials that changed color in the animation being very shaded due to the lighting around it. 
I overcame that particular problem by creating another light at the end in front of the materials changing color so it could easily be seen by the camera.

I changed the lighting used from an omni light to directional spotlights and excluded most of the shapes other then the parts I wanted lighted up. My decision on this was based on the omni lighting coming through the model from certain views, where as the target spotlight lighting does not do this. Giving a better look within the animation. 

I started using path constraints with a camera, as described in an exercise, and then used the same principal to move the models within my animation, this allowed me to use the same path for each model and the camera, to create a moving shot of all the ships and the camera. This was exactly what I needed to show the speed of the ships which made it look a lot more real. 

I didn't have any issues with the path constraints, except applying a path constraint to an object and then attaching a path, this made the object unable to move.